Brightness is what everyone wants, but we will all experience the coming of the night, but with the street lights, in the dark, more people will no longer be afraid. Everyone wants to live in a bright world. We can't change the darkness of the world, but we can illuminate our world by installing street lights. With it, our world will become brighter. In streetlights, led The use of street lamps is very common. The so-called led street lamp is a kind of lamp used outdoors, which is made of light-emitting diodes as the main material. The application range of led street lamps is more and more wide. Generally, LED street lamps are installed in parks, campuses, roads, villas, new rural areas, etc., and it has been widely welcomed by people. So for the LED street light, its installation method is also more important, today's professional sales to introduce about the installation method of led street lights, I hope you can have some reference help.
Process flow
Insulation test→Street light installation→Electrical equipment installation→Testing, pressure test→Self-checking completion acceptance electrical system, according to the civil construction sequence, do the buried cable pre-embedded line pipe, and at the same time do the work of preventing the plugging of the pre-embedded pipe.
1. Consolidation. When installing led street lights, you need to pay attention to whether the link between the street light line and the ground is relatively firm. For street lights, it will be on both sides of the road for a long time, so the stability of the line will affect whether the solar street light can function normally. The lighting state, while his stability also affects the stability of the street lamp system.
2, receiving energy, for solar led street lights, its a big advantage, the ability to absorb radiation and heat independently can not be ignored, when installing the LED street light system, when installing, you need to consider solar panels Whether it can improve the reception of natural radiation, its lighting intensity has a great influence. In the process of installation, not only the aesthetics of the street lamp, but also its value utilization should be considered.
3, for the installation of led street lights, in the installation process, professional personnel are required to install, in order to ensure the normal use of solar led street lights, to ensure its safety and stability.
Construction method
1. Insulation test: use the shaking table to measure the insulation resistance between the lines and the ground, check whether the cable is intact, whether there is leakage, and all the test values should meet the requirements of the specification. After the telemetry is completed, the core wire should be discharged to the ground. The end of the cable is sealed with a rubber blanket and wrapped with tape.
2. Street lamp installation:
(1) The installation height of the street lamp in the same position (from the light source to the ground), the elevation angle, and the direction of the lamp should be consistent.
(2) The longitudinal center line of the lamp installation and the longitudinal center line of the lamp arm should be consistent. The horizontal horizontal line of the lamp should be parallel to the ground. After tightening, the visual inspection should be free of skew.
(3) The lamp holder is fixed firmly, the adjustable lamp cap should be adjusted to the correct position according to the design, and the lamp head wiring should meet the requirements.
(4) All kinds of nuts are fastened, and gaskets and spring pads should be added.
After the Led street lamp is installed, further debugging is required to ensure his normal use. I hope that some of the above methods can provide some reference help for users.