Most farms have a variety of lights about the place, many of them in use since Maggie Thatcher was in No 10. That made perfect sense because lightbulb technology had not changed for ages.
But in the past five years, LED technology has massively improved lighting standards, with all the existing technologies suddenly looking very old-fashioned and inefficient.
More than that, we need to look at light bulbs in a different way. The wattage on the side of the cap still gives you a rough idea of the power of the bulb – for instance, 40W or 60W – but a more useful guide to how much power is being used is to look at the lumens. Or, to give them their proper name, lumen/Watt (lm/W).
See also: Boost your gutters and keep your farm buildings dry
What`s a lumen? It`s simply a means of measuring how much light a bulb gives out (which is what you want, of course) and the figure is written on every bulb.
The number of lumens on the side of the bulb actually tells you how much light is seen by the human eye, so is a better indicator of performance than wattage, which simply tells you how much electricity is flowing into the light. If you are choosing one light over another, just compare the lumen figures.
There`s another term you`ll see bandied around called lux. It`s nothing to do with soap powder – it takes into account the area over which the light is spread.
Also, if you`re over 50, you may need to pop a small magnifying glass in the top pocket of your overalls. Otherwise, you won`t be able to see the lumen figure on the bulb.
Lights – the good, bad and ugly
Incandecent
Traditional incandescent light bulbs with tungsten filaments have been around for more than 100 years, but are very inefficient. In fact. only 5% of the power used gets turned into visible light.
So if you still have a few cobwebby 100W bulbs dangling above a dusty corner of the workshop, get rid of them now – they`re using more power than you realise.
Halogen
Halogen bulbs use a filament but run at a higher temperature and are a bit more efficient than the tungsten ones (ever burnt your fingertips when taking out one that has just gone phut?).
The EU started phasing them out in 2013 and they are due to disappear altogether this year but you might as well replace them anyway.
Compact fluorescents
Curly-wurly-type compact fluorescents (CFL) use gas in a glass tube that is charged with electricity until it glows and gives off light. They use 70-80% less electricity than an old-style bulb and last up to 10 times longer, so you don`t need to chuck them out yet. However, they are gradually being edged out by LEDs.
Tubes
Fluorescent tubes (strip lights) have traditionally been a good source of efficient and effective light and are still widely found in most grainstores, workshops and livestock barns. They last a good while but need a new starter every few years, otherwise they flicker annoyingly.
You can still replace an old-school fluorescent tube with a new one but it`s getting harder to find some of the sizes. A new 4ft (1.2m) tube will cost you about £15.
However, it might be better to pay £40 for a 4ft 23W LED or £45 5ft 45W LED for a brighter, more efficient replacement. You never know, it could improve your welding skills altogether.
About Shenzhen Riyueguanghua Lighting:
Shenzhen RIYUEGUANGHUA Technology Co., Limited is a professional LED light manufacturer
since 2013. which is specializing in research, manufacturing and sales of LED lighting products.
Factory building covers an area of 1500 square meters. Equipped with advanced production
facilities and production lines of tube light, par lamp, spotlight and outdoor lighting. Rely on
quality to survive, innovation to develop. Aim to "customer first, quality first, reputation first,
service first". Unremittingly strive to be the most professional LED enterprise with proactive
and innovation, based on excellence and refinement of work principle.